Unleash Your Creativity With Sound Design | Recording Arts Canada | Digital Arts College

Unleash Your Creativity With Sound Design

You are here



Unleash Your Creativity With Sound Design

Sound design is the process of creating a new sound, or morphing a sound into something else altogether. You can use samplers, synthesizers, instruments, or any other sound-making or sound altering device. The beauty of having such an open canvas and so many different tools at your fingertips is that you can experiment and be as creative and unique as you can imagine. Here's a step by step example of a bass sound and loop we created from some vocal samples recorded with only a cell phone. The purpose of this demo is not to show how to achieve a particular sound, but instead to show one of many different creative approaches you can take when designing sound.

This example uses Ableton, but you can apply the same sort of creative decision making in any DAW.

First, the final product:

And the original samples that we used:

After getting our vocal recordings, we loaded each sample into Ableton and then consolidated them into a single WAV file.

Next, we inserted the consolidated vocal chops into a granulator. We used the Granulator II, a free Max for Live plugin.

There are many different parameters in the Granulator you can adjust to achieve many different results. In this case, we assigned macros to 'Speech Speed,' 'Grain Select,' 'Spray,' and 'Volume.' Here is the result:

We're still far from a bass sound, but as you can hear, you can already create some really interesting effects for use in other projects, such as film and other visual media. With a midi keyboard, you can play in different notes and octaves to get even more diverse results. We wanted to achieve that bass sound, so we resampled a few seconds of our output and dragged the audio file into a Sampler.


(Zoomed Out: the entire sample)

We then zoomed into our sample until we could clearly see the wave cycles. We enabled the 'LOOP,' 'SNAP' and 'Retrig' ( R ) and dragged the loop handles until we found a wave cycle that would work for our bass sound.

To further sculpt the sound, you can enable the Filter and modulate it with an LFO, such as we did in the screenshot above.

Now that we had the backbone of our bass sound, we created a short loop with a basic rhythm.

By applying some layering, parallel processing, blending, EQing, and – since this was a very electronic inspired bass sound – some hard sidechain compression to achieve some pumping, we pushed the sound even further.

In the example below, we have five versions of the same sound in parallel, each with different processing (OG, OTT, Phaser, Redux, and VERB). You can (and probably should) EQ them individually so they each have their own space in the spectrum, and use some compression to glue them all together.

You can blend them together by adjusting their volumes and then assign some macros so you can adjust many of the parameters with only eight knobs, such as we did in the snapshot above. Once again, here is the result:

So we went from some pretty bland, poorly recorded vocal shots to a very cool ape sounding synthesizer, EDM bass, and a basic dance loop in very little time. Try this same process with any sample and see what kind of results you can get!

To learn more about the sound design techniques and tools we use RAC, you can join us at one of our free sound design workshops coming up in March. More details will be available soon on our Facebook Page!

The Record: Latest mentor contributions

06 Jun

Exploring Emotions in Music: Tranquility

Tranquillity; the image that arises in most people’s minds is a serene environment, complete with soft sunlight trickling in through the foliage or reflecting upon the water’s surface. Often the contemplator is staring out onto the scene in deep and introspective meditation.

Read More
10 May

Creating a Big Room Sound with Plugins

A lot of modern recording sessions don’t take place at big budget studios like they once had. These days, it is hardly a limitation any more, compared to when consumer recording interfaces first hit the market.

Read More
15 Apr

Evoking Emotions in Music: Rage

Rage is defined by the Cambridge Dictionary as extreme or violent anger. It is the result of stimulating a stress response in the body, whether it is a violent outburst or quietly seething anger.

Read More
08 Apr

Mixing Bass Guitar: Pro Tips

I recently shared some tips for sound engineers working with a bass guitar on how to adapt their tracking techniques to different playing styles.

Read More
03 Apr

Top 10 Reverb Plugins for Music Production

The use of reverb helps to create space and depth within a mix. It's an invaluable tool because it creates an environment for the vocalist/instrumentalist to live in. Your choice of reverb has a huge influence on the vibe and spatial chemistry of your track.

Read More
02 Apr

Tracking Bass Guitar: Tips to Improve Your Process

The bass guitar is easily one of the most versatile sonic instruments there is before you even get to the processing stage of a production.

Read More
27 Mar

Problem Areas When Equalizing Vocals

Mixing the lead vocal track is often considered the most difficult part of a production. It’s usually the absolute focus and forefront of the song and it can set the tone for the quality of the recording. A great vocal track can make an otherwise mediocre album pop and come to life.

Read More
20 Mar

Understanding Proximity Effect

One of the most important skills to learn as a tracking engineer is the fine art of microphone placement. Getting a great sound takes a lot more work than just dropping a mic in a room and pointing it at what you want to record.

Read More